Linea Spindle,
efficiency at the highest level
Efficiency, flexibility and ergonomics
Lead-free brass and brass
Steel
Stainless steel
Linea Spindle is a linear multispindle with opposed vertical spindles
Designed with a standard configuration and developed in line with the principles of Lean Production.
Linea Spindle is the only mass-produced CNC-controlled linear multispindle, designed with a standardconfiguration and developed on the basis of Lean Production principles .
KEYPOINTS
Workpieces machined from bars or blanks on the same machine, simultaneously. Wide range of bar sizes that can be machined on one machine. Space-saving: no need to load bars for each machine.
Minimum set-up time
“Minimum tooling time is one of many Lean Production methods to reduce waste in a production process. Quick changeover is essential to reduce production batch sizes and thus reduce irregular flow, production losses and production variability (Mura)”.
Never interrupts the production cycle
Producing two identical or two different pieces simultaneously
Efficiency
Move from producing large-volume batches to producing many different , low-volume batches.
Spindle line avoids:
Materialwaste Storage costs Space problems
Flexibility
Work with various types of raw material (bar, forging, sintered, cast). Simultaneously produce two identical pieces or two different pieces.
Ergonomics
The machine features an ergonomic and compact design. Rigid mono-block structure incorporates ease of use, speed and rigidity.
And take advantage of:
Easy and safe access to the tooling area An intuitive interface specifically developed by Sala
Convenient access during setup and maintenance
Workpieces machined from bars or blanks on the same machine, simultaneously.
3-axis electrospindle slide (X, Z, C) | Up to 32 static tool holders | Up to 6 active CNC tools on Y-axis
Intuitive programming
Space-saving: no need to load bars for each machine.
With Linea Spindle, barmachining is not abandoned but perfected, starting with pre-cut bar sections instead of whole bars.
Advantages
Increased safety in the workshop by
avoiding frequent handling of large bundles of bars.
Less raw material is wasted, as the entire bar
is processed, including the scrap.
Maximum precision, thanks to the elimination
of vibrations in the rotating bars.
Bars from 5 mm to 60 mm diameter can be machined.
Significant reduction in machine footprint
as no bar feeder is required.
What can be done
Linea Spindle is designed to produce a wide range of components such as hydraulic fittings, automotive parts and valves with high precision. Thanks to its advanced technology and ability to machine different materials, it offers ideal solutions to meet the specific production needs of each customer, guaranteeing efficiency, quality and process customisation.
Hydraulics
Fitting for hydraulic hose.
Roundbar.
Male quick coupler.
Round bar.
Fitting for hydraulic hose.
Hexagonal bar.
Cable Bolts.
Stamped Part.
Cable Bolts.
Pre-printed.
Quick-release couplings. Direct push-in connection of the plug into the fitting.
Round bar.
Quick-releasecouplings. Direct push-in coupling of the plug into the fitting.
Round bar.
Hydraulic hose fitting.
Hexagonal bar.
1/2” female quick coupling.
Hexagonal bar.
Bushing to press for hydraulic fittings.
Round bar.
Elbow fitting for hydraulic hose.
Forged part.
Nut for hydraulics connections.
Forged part.
Ring for hydraulic fittings.
Printed piece.
Automotive
Rocker arm position adjustment screw.
Forged part.
Ball screw. Parking brake servo unit.
Forged part.
Brake servopump. Complete cylinder machining .
Printed piece.
Balance position adjustment screw.
Round bar.
Automotive Fasteners.
Stamped Part.
Fixing bolt.
Stamped part.
Valves
Component for hydraulic connection, with guaranteed seal.
Forged part.
Component for hydraulic connection.
Forged part.
Component for hydraulic connection, with guaranteed seal.
Forged part.
Actuating pin for ball valves.
Round bar.
Gas valve component .
Round bar.
Not just standard machines!
Our team also specialises in designing special solutions to meet our customers’ production requirements.
Not just standard machines!
Our team also specialises in designing special solutions to meet our customers’ production requirements.
Visit the BLOG!
Find out more about Linea Spindle, linear multispindle
with opposed vertical spindles
Linea Spindle is a CNC machine particularly suitable for sectors with very large part families, such as hydraulics and oil hydraulics, but it also finds application in fields as diverse as automotive and fittings.
